Dana Dolly V3 Beltless Integration
The DDV3 Beltless kit motorizes the Dana Dolly using a friction drive system, enabling controlled single-pass and ping-pong interview shots on short and long runs. It works with the eMotimo Spectrum ST4/ST4.3 and Conductor SA2.6.
-
Compatibility
Check if your Dana Dolly carriage and track are compatible with the DDV3 Beltless kit before setup.
-
Firmware
Required firmware updates for the Spectrum ST4/ST4.3 and Conductor SA2.6 before using the DDV3 kit.
-
Physical Install
How to mount the DDV3 motor unit to the Dana Dolly carriage.
-
Motor Engage / Disengage
Switching between motorized and manual mode using the silver locking pin.
-
Spectrum ST4/ST4.3 — Sensor & Markers
Dongle wiring, sensor board positioning, and marker sticker placement for the Spectrum ST4/ST4.3.
-
Conductor SA2.6 — Sensor & Markers
Sensor board wiring, board positioning, and marker sticker placement for the Conductor SA2.6.
-
Calibration & First Ping Pong Shot
Teaching the midpoint marker and running your first ping-pong interview shot.