ATEM Output Configuration
This page documents the standard Aux output routing for the ATEM Constellation 8K and the required MADI 1 audio settings.
Aux Output Routing
| Output | Source | Notes |
|---|---|---|
| Aux 1 | Confidence B | Confidence display at front of stage |
| Aux 2 | CG C | CG C graphics computer output |
| Aux 4 | BFC Kiosk | Campus kiosk feed; set to BFC Kiosk until walk-in |
| Output 13 | ME1 | Main program output |
| ME2 Outboard | ME2 | |
| ME3 Stream | ME3 | Stream output for RESI |
MADI 1 Audio Setting
The MADI 1 input must be set to unity and unmuted before each service.
- Open ATEM Software Control
- Go to the Audio tab
- Locate the MADI 1 fader
- Set the level to +0.00 (unity)
- Set the channel to ON (not AFV or OFF)
Warning
If MADI 1 is muted or not set to unity, audio from the SD12 will not reach the switcher correctly. Check this during the Gameday Checklist before service.
Lower Thirds / Keyers
Check that all lower thirds and side thirds render correctly when keyed before service:
- Verify CG A keyer via Stream Deck
- Verify CG B keyer via Stream Deck
See the Gameday Checklist for the full verification steps.
Notes
- Aux routing should be verified as part of the Sunday Gameday Checklist
- The ATEM Software Control application runs on ATEM Control Tier 3